Question: How do you hang Roman blinds without brackets?

Place the head rail over the top window trim and center it over the window. Place a bubble level on top of the head rail and position the blind so it remains level on the top window trim. Mark the holes you drilled onto the head rail by placing a screw into each hole then pressing the screws into the wood.

How do you hang blinds without brackets?

Command strips are an efficient way to get your blinds up. To use the strips, mount one side of the strip to the window frame or wall. The command strips come with one sticky side, but may not stick well without a little extra glue. We recommend Gorilla Glue for a secure stick.

How do you put up a Roman blind on the outside of the window?

0:452:49How to Install Outside Mount Roman Shades - YouTubeYouTubeStart of suggested clipEnd of suggested clipStarting on the left side of the window. Take a bracket and position it along your mark. Using theMoreStarting on the left side of the window. Take a bracket and position it along your mark. Using the pilot holes in the bracket. Mark. Where the screws will go repeat.

Can command strips hold up blinds?

Command strips work on painted wood, tiled walls, glass, drywall, and metallic surfaces. You can hang your blind on the window frame or on the wall beside it. Using command strips cost only a few dollars, while a professional installation will cost you a lot more.

How do you make fake Roman blinds easy?

0:316:12DIY - How to make a False Roman Shade - YouTubeYouTube

How far apart should the cords be on a roman blind?

approximately 35 cm Roman Blind Wizard will calculate the exact number of cord drops for this blind width based on normal spacing criteria (approximately 35 cm between each cord).

How do you hang blinds with brackets?

0:492:08How to Install Inside Mount Mini Blinds - YouTubeYouTube

How heavy can command strips hold?

16 pounds The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

What is a faux Roman shade?

So what is a faux Roman shade? Its simply a stationary valance thats made to look like a Roman shade. Its length cannot be constantly adjusted like a shade, and it cannot be pulled up or down. Sometimes its also called a mock Roman shade, fake Roman shade, or Roman shade valance.

How many yards does it take to make a faux Roman shade?

Fabric – I purchased 5 yards of fabric. If you have a wide window, youll want to take the fabrics repeat into consideration. 1″ x 2″ x 8′ board – This will help form the top of the shade. I spent a little more for a nice hardwood board, so I could count on it lying flat.

How much wider than the window should a Roman blind be?

Ideally Roman blinds should be fitted to the outside of the recess, extending a bare minimum of 5cms (2 ½ ) both sides of the window.

Reach out

Find us at the office

Dayberry- Antinucci street no. 75, 92993 Belfast, United Kingdom Northern Ireland

Give us a ring

Daan Hilger
+47 129 536 826
Mon - Fri, 9:00-17:00

Tell us about you