Question: How many wires do you need to wire a ceiling fan?

Do you need 12/3 wire for ceiling fan?

Super Moderator. Unless the circuit is 20 amps there is no need for #12. Lighting circuits were normally fine on a 15 amp breaker. Xx-3 cable from the switch to the fan gives you more options for switching.

What wire do I need to run for a ceiling fan?

After youve shut off the power, run the wire from the electrical panel or other power supply youll be using to the fan. Use 14-2 wire, with ground, unless you are tapping into a 20-amp circuit. In this case, all of your wire should be 12-gauge. Run a 14-3 wire with ground from the fan to the switches.

What is the difference between 12-2 and 12-3 wire?

The first number indicates the gauge of the wire. A 12-2 Romex will have a black(hot) and a white(neutral) wire as well as an unsheathed copper wire for ground. A 12-3 Romex will have a black(hot), red(hot), white(neutral), and bare copper. The red on a 12-3 is used for three-way light switches which are covered later.

Is 14 gauge wire OK for ceiling fan?

Unless you are tapping into a 20-amp circuit, use 14-2 wire. All of your wire should be 12gauge. You can run a wire from the fan to the switches.

Can you wire a ceiling fan to a light switch?

Most new ceiling fans can be wired to either a single switch or a double switch. With single-switch wiring, power to the fan is controlled by a standard single-pole wall switch, like a regular light switch. Wiring a ceiling fan is a simple electrical project.

What can you use 12 3 wire for?

ROMEX® 12/3 wire is used in buildings for circuits that use higher amperage than the standard 20 amps. Most people are not familiar with this type of wire because it is used to hook up heavy-draw appliances such as water heaters and central air conditioning.

How do you wire a ceiling fan with no ground?

0:001:16How to Install a Ceiling Light Without a Place for the Ground Wire - YouTubeYouTube

What does the red wire go to on a ceiling fan?

What does the red wire do when a ceiling fan is installed? The red wire is the ungrounded (hot wire) conductor of one switch, while the black wire is the ungrounded (hot wire) conductor of the other switch. One switch would energize the red wire in the original installation, causing the fan to turn on.

Can I use 16-gauge wire for ceiling fan?

3 Answers. Yes the 16-gauge will work just fine. Make sure your connections are well insulated.

How many amps does a ceiling fan with light use?

The majority of modern ceiling fans use less than an amp, averaging between 0.5 and 1 amp, depending on the model and the setting. One amp drawn by a ceiling fan is equivalent to about 120 watts. Low settings use less amperage while higher settings use more.

Reach out

Find us at the office

Dayberry- Antinucci street no. 75, 92993 Belfast, United Kingdom Northern Ireland

Give us a ring

Daan Hilger
+47 129 536 826
Mon - Fri, 9:00-17:00

Tell us about you